AMC2 - Access Modular Controller
Bosch's Access Control solution is unbeatable in terms of size, low weight, extensive high-end functionality and attractive design.
The AMC2 (Access Modular Controller) is used as an access controller in the access control systems ACE (ACCESS ENGINE) from version 2.0 onward, Access Personal Edition, and Access Professional Edition. The device controls a group of one to eight access points. These access points, also known as entrances, mainly consist of doors, gates, barriers, turn stiles, revolving doors, mantraps, ID card readers, door opening elements and sensors. The AMC2 can control up to eight ID card readers (depending on the reader type) and is designed for fully processing the access logic at the assigned entrances.
Product Code: 054007
- Intelligent access manager for one to eight entrances
- Four interfaces include the reader power supply
- Standard 2 GB compact flash
- LCD display for displaying information
- Self-controlling send and receive switching
- Individual electronic verification of plugs and outputs
Status checks can be carried out using the eight analog inputs. The eight relay outputs are used to activate the door opening elements and/or generate the security activation and signaling. The AMC2 stores all necessary information in a battery-buffered memory and a compact flash storage element so that, even when the unit is offline, it is able to carry out independent authorization checks on access points, take access decisions, control closing/opening elements and register movement events.
Product Data Sheet
The AMC2 4W has four connections for connecting up to four ID card readers. ID card reader and door control element interfaces are
split into four channels, each with four connection plugs. The following definitions apply to the Wiegand interface:
- 10-wire interface (incl. shield)
- Maximum cable length of 158 m (500 ft.) to ID card reader
- 26-bit Wiegand format, or
- 37-bit Wiegand format