Electro Magnetic Locks are locking devices that consists of an electromagnetic core (constructed of a laminated steel-core surrounded with hundreds of turns of copper wire) and an armature plate (carbon free steel plate).
By attaching the electromagnet to the door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate, holding the door locked. Electro Magnetic Locks have no interconnecting mechanical parts and therefore require constant power.
FSH Electro Magnetic Locks are of highest quality and come with a Lifetime Warranty.
Electro Magnetic Lock accessories also available, please have a look through the FSH catalogue here. To discuss, please call our office on 1300 377 379 or use our contact form.
ECO3500M Power Saving Electro Magnetic Locking Device
The patented ECO3500M model is a power saving Electro-Magnetic Lock. Under normal, non-alarm conditions, the ECO3500M “EcoMag” operates in a low current `Sleeping Mode’ of 60mA @ 24V with a holding force of 100kg. In the event of an unauthorised attempt to open the door, the ECO3500M “EcoMag” “wakes up” and goes into an Alarm Mode with full current of 300mA@24V applied to the device, instantly increasing the holding force to up to 280kg. Product Code: Call Product Brochure
The FEM3500 is an unmonitored single magnetic lock and FEM3500D is an unmonitored double magnetic lock with dual 12 or 24 Volt settings.
The FEM3500M is a monitored single magnetic lock and the FEM3500DM is a monitored double magnetic lock both with 12 or 24 Volt settings. Each monitored magnetic lock has a built-in Hall Effect Sensor for remote monitoring of Lock status (LSS). The devices have a highly visible high luminosity Light Panel and a Door Status Sensor (DSS) for remote monitoring of the door status as well as Lock Status Sensor (LSS). The monitored devices come with a patented Anti-Tamper-Security-Plate as standard to prevent hostile attacks on the dome-nut-fixing bolt of the Armature Plate.
The Electro Magnetic Gate Lock FEM5000G has a holding force of up to 630kg and is IP67 weather resistant with a stainless steel body housing. The device provides a dual fixing arrangement, a built-in varistor surge protection and accepts both 12 and 24VDC. Product Code: E25009 Product Brochure
The FEM5700 is an unmonitored single magnetic lock and the FEM5700D is an unmonitored double magnetic lock with dual 12 or 24 Volt settings.
The FEM5700M is a monitored single magnetic lock and the FEM5700DM is a monitored double magnetic lock with 12 or 24 Volt settings. Each monitored magnetic lock has a built-in Hall Effect Sensor for remote monitoring of Lock status (LSS). Product Code: E25010 (Single) Product Code: E25012 (Double) Product Brochure