HCR-100 Kit, 4 Channel RX and 2x HCT-4 Keyfobs

The HCR-100 is a general purpose 433.92Mhz Keeloq (TM) rolling code receiver with four (4) SPDT relay outputs available to control external devices. The 4 relays can each be programmed to work with different buttons on individual remote controls. The relays are also programmable via a DIP switch for momentary, latching or timed control. This receiver can be powered from 12 to 24V AC or DC.

The HCR-100 is housed in an IP56 water resistant enclosure for weather protection making it ideal for any outdoor application.

Specifications
Operating Voltage: 11 to 30VDC, 11 to 24VAC
Current Consumption: @ 12VDC Standby 15mA, All relays 60mA
@ 24VDC Standby 23mA, All relays 72mA
@ 24VAC Standby 82mA, All relays 190mA
Physical Dimensions IP56 Case 100mm x 100mm x 50mm
Antenna tube 150mm
Output Channels 4
Output Ratings SPDT relay 1 Amp switching
maximum @ 24VDC.
Contacts are voltage free.
Reverse Polarity Protection Yes ( diode)
RF Operating Frequency 433.92mhz
Receiver type Super heterodyne narrow band
RF Signal Type ( Data Transfer) On Off Keying ( OOK)
Keeloq TM Code Hopping
Coding Combinations 4.2 billion
Learning Capacity ( RF Devices ) 900 fobs
Country of Manufacture Australia