Microlatch compatible Wiegand Receiver – External

This product is designed to provide a convenient high security RF interface to an
access control system which recognises the Wiegand 26 bit protocol. The HCR-W4 may operate in one of two modes.
Mode 1:
The received signal is decoded into a 26 bit Wiegand number and the output
corresponding to the button pressed on the fob ( 1, 2, 3, 4 ) presents this
Information for input to the access control system. In this mode up to 4 entry/exit
points may be controlled from the one receiver.
Mode 2:
The received signal is decoded into a 26 bit Wiegand number and output on
“BTN 1”. Each button on the fob increments the user number by one (1).
Eg: Fob is programmed as Site 123 with button 1 on the fob outputting user 456.
Button 2 will then be User 457, button 3 user 458 and button 4 user 459.